ALL PRODUCTS

Standpipe – Model 7000-13Standpipe – Model 7000-13

Standpipe – Model 7000-13

The Standpipe is a good example of our goal to design equipment that provides long-lasting and reliable function while keeping installation, operation, and maintenance as quick and easy as possible.

FEATURES:

  • 10 ft (3 m) Mast Standard for Better Radio Paths
  • Multiple Uses
  • Sturdy Construction
  • Reduced Maintenance Effort Due to Elimination of Mounting Bolts
Antenna Lightning Protection – Model 7205-00

Antenna Lightning Protection – Model 7205-00

The Antenna Lightning Protection – Model 7205-00 is a gas-filled surge protection device with a changeable Gas Arrester Tube designed to protect transmitters, repeaters, and base stations from surge voltages caused by lightning or other electrical sources induced onto antenna cables.

FEATURES:

  • Gas-Filled Surge Protection
  • Easy Replacement After Lightning Event
  • Effective Discharge Mechanism for Direct & Indirect Strikes
Lightning Protection Device – Model 7200-00

Lightning Protection Device – Model 7200-00

The Lightning Protection Device – Model 7200-00 reduces the risk of system failure for equipment frequently exposed to lightning storms.

FEATURES:

  • 1.5 to 1000 MHz Frequency Range
  • Multi-Stroke Capability
  • Low Strike Throughput Energy
  • DC Blocked
GPS Antennas – Model 7131

GPS Antennas – Model 7131

The GPS Antennas – Model 7131 is an external, high performance Global Positioning System (GPS) antenna for use with the ALERT2 family of Data Transmitters.

FEATURES:

  • High Gain, Low Noise
  • Low Current Consumption
  • Fully Weatherized/Waterproof
High Gain Directional Antenna – Model 7105-04

High Gain Directional Antenna – Model 7105-04

The High Gain Directional Antenna – Model 7105-04 is a heavy duty point-to-point Yagi antenna commonly used in data transmission and control station applications.

FEATURES:

  • Heavy-Duty Construction
  • 7.0dB Gain
  • Stackable for Additional Gain
  • Components Gold Iridited for Maximum Life
Broadband Antennas – Model 7101-00

Broadband Antennas – Model 7101-00

The Broadband Antenna – Model 7101-00 is a 6 dB or 9 dB gain antenna. The Broadband Antenna’s 10 MHz bandwidth provides optimum performance in single or multi-frequency systems, on both transmit and receive.

FEATURES:

  • 138 to 174MHz & 220 to 222MHz
  • 4 Folded Dipoles for High Gain
  • Lightning Resistant
3dB Gain Omni-Directional Antenna – Model 7110-00

3dB Gain Omni-Directional Antenna – Model 7110-00

The 3dB Gain Omni-Directional Antenna – Model 7110-00 is a 3dB base matched ½ wave vertical J-pole antenna fed at the end through a quarter wave shorted transmission line.

FEATURES:

  • Various Ranges Available
  • No Frequency Adjustment Needed
  • Requires No Ground Plane or Radials
  • Integrated with the 7000 Series Standpipe
RF Power Amplifiers – Series 3800

RF Power Amplifiers – Series 3800

The RF Power Amplifiers – 3800 Series are compatible with most ALERT/ALERT2 manufacturer’s equipment.

FEATURES:

  • Strengthen Weak Radio Paths
  • Other Frequency Ranges Available
  • Solid-State Design
Data Transceiver – Model 3701-00

Data Transceiver – Model 3701-00

The Data Transceiver – Model 3701 is designed for use with data generating devices using Audio Frequency-Shift Keying (AFSK) type modulation systems. The Data Transceivers provide outstanding frequency stability and control.

FEATURES:

  • Programmable Narrow or Wide Band
  • Factory Alignment for Peak Performance
  • Waterproof Casing
  • Programmable up to 16 Channels

Field Technician Decoder – Model 1001-00

RETIRED PRODUCT – NO LONGER AVAILABLE! Please consider Model 8440 Series of StormLink® IQ for a mobile solution to decode ALERT and ALERT2 messages from the field.


The Field Technician Decoder – Model 1001-00 was designed to make the technician’s work in the field easier. Used in conjunction with a radio scanner and laptop computer, the Field Technician Decoder allows the technician to receive and display transmitted ALERT/IFLOWS gauge data on site.

FEATURES:

  • Small and Light for Field Use
  • Internal Speaker
  • No External Battery Required
  • Make Field Technician’s Work Easier
Serial Transmitter – Model 3210

Serial Transmitter – Model 3210

The Serial Transmitter – Model 3210 receives either Synchronous or Asynchronous serial output data from a data logger or data acquisition unit and converts this data to an ALERT/IFLOWS format for radio frequency transmission.

FEATURES:

  • Reliable, Simple Interface for ALERT Transmissions
  • Low Cost Addition to Other Manufacturer’s Data Loggers
  • Compatible with All Existing ALERT/IFLOWS Networks
ALERT Data Receiver – Model 4500-02

ALERT Data Receiver – Model 4500-02

The ALERT Data Receiver – Model 4500-02 base station accepts transmitted data from field transmitters or repeater stations.

FEATURES:

  • Compact and Lightweight
  • Includes VHF/UHF Data Transceiver
  • Low Power Consumption
  • Internal Speaker
ALERT Transceiver / Decoder – Model 3345ALERT Transceiver / Decoder – Model 3345

ALERT Transceiver / Decoder – Model 3345

The ALERT Transceiver / Decoder – Model 3345 combines the functions of a Receiver, Decoder, and Serial Transmitter.

FEATURES:

  • Combines Functions of Receiver, Decoder, and Serial Transmitter
  • Fully Automatic
  • Desktop Version or 3U Rack-Mount Chassis
ALERT/IFLOWS Decoder – Model 1000-03

ALERT/IFLOWS Decoder – Model 1000-03

The ALERT Decoder – 1000 Series decodes incoming data and provides a RS-232C output for computer input.

FEATURES:

  • Two RS-232 Channels
  • 12 VDC Powered
  • Low Power Consumption
  • Sensitive to Weak Messages
ALERT2 Demodulator – Series 1002ALERT2 Demodulator – Series 1002

ALERT2 Demodulator – Series 1002

The ALERT2 Demodulator – 1002 Series receives ALERT2 messages from remote sensing stations and passes them to a base station computer equipped with an ALERT2 base station software program.

FEATURES:

  • Receives ALERT2 and Concentrated ALERT
  • SD Card Stores & Logs Data
  • Ethernet & Serial Data Ports
  • Optional ALERT Receive Capability
Programmable Store & Forward Repeater – Model 3300-00

Programmable Store & Forward Repeater – Model 3300-00

Repeaters are one of the key components of an ALERT/IFLOWS data collection network. Often an entire network or a significant portion of the system’s gauges report through a single repeater.

FEATURES:

  • Field Programmable
  • Echo Suppression For Single Frequency Systems
  • Digital Noise Suppression Of Extraneous Signals
  • Self Reports It’s Battery Voltage
  • Optional Sensor Inputs

Showing 33–48 of 104 results