Antenna Lightning Protection – Model 7205-00

SKU: 7205-00 Category: Antennas Tag: Antenna

The Antenna Lightning Protection – Model 7205-00 is a gas-filled surge protection device with a changeable Gas Arrester Tube designed to protect transmitters, repeaters, and base stations from surge voltages caused by lightning or other electrical sources induced onto antenna cables.

FEATURES:

Gas-Filled Surge Protection
Easy Replacement After Lightning Event
Effective Discharge Mechanism for Direct & Indirect Strikes

The Antenna Lightning Protection has a threaded cap on the side that contains a recess that positions the gas arrester tube in the center of the access hole. The Antenna Lightning Protection’s gas discharge tube can be replaced in the event that a lightning strike causes a failure.

Specifications

Specification	Description
Maximum Continuous Voltage	280 VDC
Nominal Current	5 A AC (77° F (25° C))
Operating Effective Current	≤1 µA
Nominal Discharge Current	20 kA (8/20) µs maximum
Pulse Discharge Current	2.5 kA (10/350) µs
Nominal Pulse Current	100 A (10/1000) µS
Maximum HF Power	700 W (VSWR= 1.1) in a 50 ohm System
Output Voltage Limitation	≤900 V @ 1 kV/µs Waveform Line to Shield (Ground)
Voltage Standing Wave Radio (VSWR)	1.1 typical (≤2.0 Ghz) in 50 Ohm system
Capacitance (Common Mode)	1.5 pF typical
Connectors	Type “N” Female to Type “N” Female, 50 Ohm
Housing Material	Nickel-plated brass
Temperature Range	-40° to 176° F (-40° to 80° C)
Dimensions	1×1 x 2.6 in (2.5 x 2.5 x 6.7 cm) (H x W x D)

Ordering Guide

Model 7205-00 ……… Antenna Lightning Protection

OPTIONAL:
Model 7205-01 ……… ALP w/GAT and Right Angle Bracket
Model 7205-02 ……… ALP w/GAT and Straight Bracket
Model 7205 05 ……… Gas Arrester Tube (GAT)
Model 7205-06 ……… Threaded Cap over Gas Arrester Tube
Model 7205-07 ……… Right Angle Mounting Bracket w/ Lock Washer and Hex Head Nut
Model 7205-08 ……… Straight Mounting Bracket w/ Lock Washer and Hex Head Nut